Commercial & Trade Work

Here at Maldon Shot Blasting & Powder Coating Ltd carry out trade work high and long lasting standard.

We are very aware that other’s offer a cheaper service, however we DO NOT cut corners and offer a professional service.

The material governs the approach we take on the first stage preparation.

Steel work will be blast cleaned where required to remove mill scale and any surface rust.

Primers and Polyester coatings.

All parts may be blast cleaned or de-greased & phosphated as standard practice and can have a self-healing AKZO NOBLE (PZ770) primer applied as an optional extra and semi cured a polyester coat then applied to the primer, this is normally done whilst the work is still hot from the fist stage, this allows better adhesion and promotes further coverage in the hard to reach places as joints and corners.

To view the data sheet for PZ770 please follow this link.

http://www.interpon.com/NR/rdonlyres/9F7FA48D-9E3C-4612-8C84-9D6CEDBBCAA8/5387/INTERPONPZ770ProductDataSheet2.pdf

If you are on a fixed cost we will offer just a one coat system, this in it self will stand the test of time as all commercial parts are de-greased & phosphated.

For extra and very long lasting protection.

The advantages of using Plascoat over normal powder coating products are many fold, acid and salt resistant, chip proof and very flexible.

Plascoat is ideal for protection of Railing work, flat sheet steel or any other material

With a colour range, for further information please visit:-  http://www.plascoat.com.

Plascoat can have a further polyester topcoat applied to achieve another colour not available in the Plascoat range facilitating ultimate protection and the colour choice required.

Thermoplastic coatings offer a thick protective layer to the metal and are often used either to protect the underlying e-coat from chip or impact damage or to provide a “cushion” effect for parts that are in contact with each other.

Here are just some of the excellent properties of Plascoat:

      Flexibility, can be stretched 1000% before coating fails.

      Damage to coating can be repaired easily be repaired.

      Significantly higher UV resistance.

      Very low toxicity.

      No plasticisers, chlorine or halogens.

      Low temperature performance to -70°C.

      Does not shrink or become brittle in hot weather.

      Harder coating.

      Higher impact strength

      Higher stone chip resistance.

      Salt & acid resistant.

      Will not fade or peel.

Please feel free to call us to discuss your projects, or you want to know more about our processes and how we can help you.



One refurbished park bench for a local Parish Council, coated in anti graffiti powder coat finish.



Various commercial powder coated projects…



A Refurbished, Powder Coated Robotic Microscope used in drug discovery…



Fibre Trays, Racks & Cabinets for the Computer Industry



Agricultural Plant & Machinery – Powder Coated




Our Opening Times:
Monday to Friday: 9.00am – 5.00pm
Saturday: 9.30am – 12.00pm
Closed Bank Holiday weekends

Tel:01621 841100
Fax: 01621 842233

Unit 2a
Benbridge Industrial Estate,
Heybridge, Maldon, Essex CM9 4ER


Facebook Posts

Take the heat off

This product is really taken off. The silver items have had our two coat system internal heat barrier applied that keeps a lot of heat radiation through the system, improves performance according to the manufactures of this product. Long lasting will not discolour or flake off or crack even with rapid cooling. We are so confident that we will guarantee against fading & cracking. However at very high temperatures running red hot it may lose some luster. Applied by our team who have gone through extensive training so to offer you the best finished product possible.
... See MoreSee Less

View on Facebook

Nice little Illusion Blue number ... See MoreSee Less

View on Facebook

Hardwood blasting service, Bring back all the fine features. Not ideal for softwoods. It's not expensive and will save time and effort. Items are charged at an hourly rate plus blast media materials consumed. ... See MoreSee Less

View on Facebook

We don't set out to make problems for anyone. We comply with health & safety rules and have always carried out improvements when requested by H&S in fact the last visit cost my business getting on for 20K to fit new spray booths and this is fine as it has made improvements to the environmental impact and improved productivity. We have a full insurance inspection twice a year on the plant & machinery, have our staff monitored for related medical issues, breathing hearing etc, three of them have full fork lift training, all this costs a small fortune but we play the game and do what needs to be done. Ok if your company is out of line and causing problems then you can and should expect some sort of comeback, but all it takes is for someone to make the problems and inconvenience known to the owner that it may cause other people, not hide behind the authorities.

Anyway who ever it was thought our gas calor gas tanks were wrongly sited, the fact they have been there for 12 years and sited by Calor gas who know the law and regs inside out how to site them. They are checked every year for safety including the feed out gas pipes, they are protection by safety barriers and are in line with the regs at the time of placement. It seems some twat thinks they know better. I guess they don't like to see businesses who are doing well play the game or they just don't like them where they are. It makes me think is it all worth the grief and frustration and great expence running a business these days.

Some idiots think you have a wallet full of money, guess again we don't. It's a very costly running a company large or small. so many rules regs, miles of red tape, dealing with employment rules, tax & vat, Health & safety, taking on increasing overheads without passing them on trying to be fair and just.

The cherry on top of the lot is the twats that have nothing better to do but stir up further unfounded complaints. Makes me extremely angry..

Thats my anger vented and as far as I am concerned that hopefully is the end of it.
... See MoreSee Less

View on Facebook