Powder Coated  Wheels

Powder coating car & motorcycle wheels offers long term protection that will far  outlast and offered by the roadside mobile repair van services.  

We offer a five year anti corrosion warranty. By using high grade materials and meticulous preparation of each wheel rim we are confidant that our work will outlast the five year term.

Every part of the rim is taken back to the substrate by blast cleaning checked for cracks (no half hearted short cuts), then after degassing the rims have hot zinc primer coat applied and a polyester powder coat finish coat. Further coats are applied as diamond clear or tinted lacquers to give that special finishing touch. Some rims may not be suitable for powder coating, not sure then please feel free to ask one of our highly trained team.
Why compromise! and why should you, we are normally cheaper than some mobile wheel refurbishment  services.  

Please note.
Tyres and wheel bearings should be removed beforehand.
We no longer offer tyre removal or re-fitting.

Alloy Wheel refurbishment Prices now include vat          Up to 16”        17-19”          20-22”           23-25”
Blast cleaned, Anti corrosion coat, Finish colour coat,    £60.00           £65.00        £70.00           £75.00
in any standard RAL stock held colour.

Full set of 4                                                                      £230.00        £240.00       £260.00         £280.00

Split Rims (must be split by client)            each wheel    £80.00          £90.00          £100.00         £110.00

Steel wheels                                                                    £55.00          £60.00          £65.00           £70.00

Full set of 4                                                                      £200.00        £220.00        £240.00         £260.00

Chrome Silver & Clear Lacquer coat    Add £15.00 per wheel

Extra crystal clear lacquer coat            Add £15.00 per wheel

Spoke wheels    From £65.00

Prismatic stock held colours                 Add £20.00 per wheel

Chrome Silver & Clear Lacquer coat    Add £15.00 per wheel

Motorcycle wheels    £66.00
Motorcycle wheels two colour    £95.00 each

Prismatic stock held colours                 Add £20.00 per wheel

Chrome Silver & Clear Lacquer coat    Add £15.00 per wheel

Bearing removal motorcycle                Add £15.00 per wheel


Sorry we can’t take in your car.

Preparation.
Every surface of the wheel is refurbished Including the inner tyre rim. Unlike some mobile repairers that just repaint the parts on show.
1. No acids are used during this process.

2. Bead or blast cleaned.

3. Checked for any cracks and damage.

4. Repair if required subject to damage. (at extra cost).

5. Self-healing coat applied on all surfaces

6. Finish coat in any stock colour on all surfaces. Alternatively, colour matching service.

7. Five year anti corrosion and paint fade warranty. subject to condition.Why powder coating over wet paint? – Powder coatings when used, gives a durable and long lasting finish  Tougher than conventional wet paints.

Every surface of the wheel is refurbished Inc. the inner rim. Unlike some that just repaint the face. Blast cleaned removing all old paint and any corrosion, Ultra cleaned and phosphate, Degassed and final hand preparation including masking off where required.

Primer coating.
Zinc rich primer coating is a protective anti-corrosive powder layer and is very effective when applied, when cured in the correct manner; Maldon Shot Blasting was one of the first to start offering this product to the public. Colour matching.

Standard colour’s
There are hundreds of colour’s and finishes available in gloss, semi gloss, matt and textures.  Colour matching, see the range under the powder coat heading.

 
Two tone.
Faded in effects using two or more colours.

 
Special effects.
Offering a wide range of finishes and pearl finishes, tinted and metallic lacquers, smoked/black chrome’s,

Corrosion.
Corrosion will be treated and removed completely during the blast cleaning; Maldon shot blasting have special fillers in stock for minor corrosion repairs, or a alloy welding service for deeper or deep kerb damage.

Collection & Delivery
You will need to book this service by 12 noon for collection the next day. Once work has been completed we will send them back right to your door anywhere within the UK or E.U.

What are the collection costs?
We only charge on to the client the cost of this service; costs are subject to size and weight. Costs are around £25.00 for collection & delivery ( up to 20kgs per delivery) UK Only

Will we repair badly damaged wheels?
No, we will not put your life in danger. We strongly recommend replacements. Hair line cracks can not always be detected and may lead to total failure.

Chemically stripped refurbished wheels No acid is used during this process.

2. Bead or blast cleaned.

3. Checked for any cracks and damage.

4. Repair if required (at extra cost).

5. 60% Zinc primer or self-healing coat applied on all surfaces

6. Finish coat in any stock colour on all surfaces. Alternatively, colour matching service.




Our Opening Times:
Monday to Friday: 9.00am – 5.00pm
Saturday: 9.30am – 12.00pm
Closed Bank Holiday weekends

Tel:01621 841100
Fax: 01621 842233

Unit 2a
Benbridge Industrial Estate,
Heybridge, Maldon, Essex CM9 4ER